Electric Gate Kits & Automation | SHOP
Showing 1–40 of 177 resultsSorted by popularity
FiltersPHOX2 Button keyfob remote. Fully compatible with older V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY2 HANDY4 PHOX 2 Radio Remote for Electric Gates and Radio Control Systems - Supplied as contract 111
- Rolling code transmission 433.92 MHz 2-button version,
+ VATPHOX4 Button keyfob remote. Fully compatible with older V2Â Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY2 HANDY4 PHOX PLUS - Supplied as contract 111 -Â Rolling code transmission 433.92 MHz 4 button version,
+ VATAllmatic FOR4 433.92MHz Remote Control – a reliable 4-button keyfob transmitter for gates, shutters, and barriers. Compact and durable, it offers rolling code security and easy pairing with compatible Allmatic receivers. Ideal for multi-gate or door control in one handset.
Compatibility
The Allmatic FOR4 remote control is compatible with the following Allmatic automation systems and receivers operating on 433.92 MHz rolling code:- Allmatic receivers and control boards with 433.92 MHz rolling code technology
- Allmatic Bro transmitters (same coding system)
- Allmatic Pass 433.92 MHz receivers
- Allmatic control panels with integrated rolling code radio modules
+ VATTech3 433Mhz Radio transmitter for use with Allmatic Receivers and Control Panels for Electric Gates, Barriers and Doors.
+ VATPHOX4 Button keyfob remote. Fully compatible with older V2Â Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY
+ VATB.RO2WN 433Mhz Radio transmitter for use with Allmatic Receivers and Control Panels for Electric Gates, Barriers and Doors.
+ VATPHOX2 Button keyfob remote. Fully compatible with older V2Â Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY2 HANDY4
+ VATFix code transmitter with: Led signalling to show transmission. 10-ways dip-switch for programming. dip-switch for selection of the channel. AEMX4 4 channels transmitter – Product ID: 12005020
£21.43 + VAT
B.RO4WN 433Mhz 4 Button Radio transmitter for use with Allmatic Receivers and Control Panels for Electric Gates, Barriers and Doors.
+ VATWall-mounted photocells adjustable (180°) and synchronised 13C003 Photocell size 41 x 115 x 38
£40.46 + VAT
FTALL7 Ft007. Photocells (TX / RX) infrared modulated light, range up to 25m and new sophisticated pcb designed to ensure the maximum Immunity to disturbances and interference. Synchronized photocells
+ VATThe V2 City1 EVO is a highly functional control unit designed for 230V swing gate motors. It features obstacle detection, a self-learning operating time function, and a programmable maintenance reminder, making it perfect for efficient swing gate automation.
Original price was: £165.00.£125.00Current price is: £125.00. + VAT
V2 Match Royal transmitter and copier for fixed codes 433.92 MHz
£26.25 + VAT
Optimise Your Automation System with the V2 MR2 Plug-In Receiver Module
The V2 MR2 plug-in receiver module is a must-have for any automation system utilising Royal or Personal Pass series transmitters. With an impressive capacity to store up to 1008 codes and support for self-learning transmitters, the MR2 module ensures effortless and reliable control over your system. Simple and Versatile Programming Options Programming the V2 MR2 is designed to be user-friendly, offering both basic programming via a simple button press and advanced programming using software. This flexibility allows you to customise your automation setup according to your specific needs.£29.95 + VAT
V2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 111 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 111. Please advise us if you require contract 2 or 694
£84.99 + VAT
Sliding Gate Motor Kit for electric sliding gates up to 800 Kg Supplied with two remote controls and safety beam
Original price was: £508.00.£408.00Current price is: £408.00. + VAT
TRC4 V2 Fully compatible with V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4Â HANDY2 HANDY4 TRC4 - Supplied as contract 111 -Â Rolling code transmission 433.92 MHz 4 button version,
£21.25 + VAT
2mtr mechanical safety edge can be hard wired to the control panel or used in conjunction with our wireless safety beams as an enhanced safety system for sliding gates. Hard wired or can be connected with a wireless edge kit available separately. Can be cut to size.
£66.66 + VAT
V2 Wally1 Single Channel Stand Alone Radio Receiver
Original price was: £89.84.£33.75Current price is: £33.75. + VAT
V2 Calypso 230v motor irreversible electromechanical actuator for swing gates with leaves up to 3m in length.
Product Features:- Single version for both right and left leaves- Emergency release system-400 version for leaves up to 2.5 m 22G001500 version for leaves up to 3 m 22G003600 version for leaves up to 4 m 22G016Price range: £145.00 through £235.00 + VAT
Select options This product has multiple variants. The options may be chosen on the product pageWireless transmitter / receiver kit for moving safety edges on electric gates Wireless safety edge kit for mechanical or resistive safety edge. Transmitter unit is battery powered and is fixed to the safety edge on the gate and the receiver unit is mounted with the gate control panel. This handy kit comes complete with weatherproof enclosures, cable glands, batteries etc.
£94.80 + VAT
AM1 PAD Wired Stand alone access control keypad, Backlight, 1000 users, 2 output relays, suitable for electric gates or door access. AM1 PADÂ Stand alone access control keypad, backlighted, 1000 users, 2 output relays, 12/24Vdc, optical tamper 12 or 24v supply.
Operating conditions:
Temperature: -20°C to +50°C
RH: ≤95%
Power and voltage requirements:
DC input: 12V to 24V
AC input: 12V to 24V
Standby current: ≤20 mA
Operating current : ≤50 mAOriginal price was: £108.33.£88.32Current price is: £88.32. + VAT
The V2 SENSIVA-WL photocells are battery-powered, wall-mounted devices capable of synchronizing up to 8 pairs of units. With a 180° horizontal adjustment and 30° vertical adjustment, they offer a flexible and secure solution for automation safety. Photocell size 41 x 115 x 38
£69.50 + VAT
230V analogue control unit for electric swing gates and sliding gates The V2 Flexy 2 is an analogue control unit for swing gates, it is special because it comes equipped with a built in receiver (433.92 MHz) Adjustment and programming by trimmer and dip-switch 230v power supply for 2 single phase motors Safety device test before any opening Start, pedestrian start and stop controls from transmitter Open/close limit switch inputs
Original price was: £188.68.£89.99Current price is: £89.99. + VAT
1.5mtr mechanical safety edge can be hard wired to the control panel or used in conjunction with our wireless safety beams as an enhanced safety system for sliding gates. Hard wired or can be connected with a wireless edge kit available separately. Can be cut to size.
£58.29 + VAT
V2 Wally2 Two Channel Stand Alone Radio Receiver
Original price was: £102.77.£38.75Current price is: £38.75. + VAT
External antenna for improved range on 433 and 868 MHz radio systems. If you are having trouble with the radio control range on your electric gate installation you may want to consider adding and external antenna. Gate remote controls work by radio not infra-red but anything  between the transmitter and the control panel receiver will limit the effective range. Many of our automatic gate kits come with and internal antenna that normally gives good range but the external antenna can be fixed above the  fence or gatepost giving a better line of sight to the point from which you will operate the gates. In some very rare cases other radio interference can reduce the range on an electric gate or door radio control system and an external antenna may not help in such a case but it does let you locate the antenna in a slightly different position so may still worth trying.
£24.99 + VAT
Allmatic SO400 Gate Motor - 230v Single Gate Electric Gate Ram. Electromechanical irreversible gearmotor 230Vac. High performance electrical motor. Refined mechanics with a 4 thread endless screw for wings up to 2.5m. Mounting bracket included. These Motors are handed left and right - marked S or D on the motor case casting - please advise which you require
£195.00 + VAT
Select options This product has multiple variants. The options may be chosen on the product pagePHOX4 Button keyfob remote. Fully compatible with older autoroll V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY on contract 597 as previously used by Auto-Roll
+ VATV2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 694 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 694. Please advise us if you require contract 2 or 111
£84.99 + VAT
Miniaturized wall-mounted and pillar-mounted photocells, synchronised and self-aligning 13C002
£34.99 + VAT
BIOS2 Control units for 2 gearmotor 230 Vac with object detection, lock control and safety edge input Main characteristics:
- Control unit with managing of a transmitter through the display.
- Extractable memory and terminal boards.
- Electronic torque adjustment.
- Learning up to 1000 transmitters.
- Functions selection through display.
- Self–learning of strokes.
- Differentiable slowing downs during opening and closing phase.
- Adjustable obstacle detection.
- Self-diagnosis of safety devices.
- Led for inputs status.
- Radio receiver module.
- Inputs: open button, close button, step–by–step button, pedestrian button, stop button, 2 photocells and safety edge.
- Outputs: Integrated flashing circuit 230 Vac, courtesy light/open gate warning light and power supply accessories (24 Vdc)..
- Dim. (mm) W x D x H = 145 x 180 x 85 BOX
£119.50 + VAT
Terra underground automation kit for a pair of Electric gates Terra 230v Underground Gate Automation Kit Terra Kit Includes 2 x Terra motors 2 x Foundation boxes with steel lids. 2 x 110 degree lever arms 2 x Manual release keys1 x Control unit 1 x Pair of photocells 2 x Remote controls Specifications Weight:Â 64.06 kg Length:Â 398.0mm Width:Â 328.0mm Depth:Â 164.0mm Gate: Max Gate Weight:Â 400.0kg Max Gate Width:Â 3.5m
Original price was: £833.33.£750.00Current price is: £750.00. + VAT
V2 Vulcan 230v Underground Gate Automation Kit Vulcan Kit Includes2 x Vulcan motors 2 x Foundation boxes with steel lids. 2 x 110 degree lever arms 2 x Manual release keys1 x Control unit 1 x Pair of photocells 2 x Remote controls SpecificationsWeight:Â 64.06 kg Length:Â 398.0mm Width:Â 328.0mm Depth:Â 164.0mm Gate: Max Gate Weight:Â 800.0kg Max Gate Width:Â 3.5m
Original price was: £1,297.69.£1,125.00Current price is: £1,125.00. + VAT
24v Sliding Gate Motor Kit for electric sliding gates up to 1000 Kg Motor and Control board only - No remote controls or safety beam supplied
£299.00 + VAT
Bolt on post bracket suitable for mounting V2 Calypso Electric Gate Motor
£18.00 + VAT
SO400/IT OPERATOR FOR SWING GATES WITH WINGS UP TO 3m MAX WEIGHT OR UP TO 350Kg. IDEAL FOR RESIDENTIAL USE.
Mounting brackets included.
SO400/IT version 230VacTwo motors, Two remote Controls and fixing brackets. One set of safety photocells and with BIOS 2 Eco Control unit for 1 or 2 wings gate. Available also in an advanced version. Electronic torque adjustment, extractable memory, functions selection through display, self–learning of strokes, differentiable slowing downs during opening and closing phase. Control unit with managing of a transmitter through the display.
Original price was: £479.16.£379.00Current price is: £379.00. + VAT
High quality sliding gate system for gates of up to 600kg - supplied with two remote controls and an infrared safety beam. Allmatic Moveo Sliding Electric Gate Kit for gates up to 600KG Powerful 230v motor with integral transformer and control system for sliding gates giving smooth and quiet operation. Extra remote controls can be added and it is easily interfaced with home automation systems, intercoms, access control etc as required. The motor carries a seven year warranty for domestic / residential use.
Original price was: £454.17.£395.83Current price is: £395.83. + VAT
Optional Internal Gate Stop for V2 STARK3 Gate Ram 162258
£16.66 + VAT
Radio keyboard Rolling Code 10 channels - 99 Users forr use with Allmatic Receivers and Control Panels for Electric Gates, Barriers and Doors • Box in ABS with protection rating IP65. • 10 channels. • Polycarbonate backlit function keys. Led status for a fast and simple programming. 9 V battery power supply and/or 12/24 Vac/dc power
£62.95 + VAT
