Electric Gate Kits & Automation | SHOP
Showing 1–20 of 98 resultsSorted by popularity
FiltersPHOX2 Button keyfob remote. Fully compatible with older V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY2 HANDY4 PHOX 2 Radio Remote for Electric Gates and Radio Control Systems - Supplied as contract 111
- Rolling code transmission 433.92 MHz 2-button version,
£24.96 ex. VAT
PHOX4 Button keyfob remote. Fully compatible with older V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY2 HANDY4 PHOX PLUS - Supplied as contract 111 - Rolling code transmission 433.92 MHz 4 button version,
£24.96 ex. VAT
PHOX4 Button keyfob remote. Fully compatible with older V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY
£24.96 ex. VAT
PHOX2 Button keyfob remote. Fully compatible with older V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY2 HANDY4
£24.96 ex. VAT
The V2 City1 EVO is a highly functional control unit designed for 230V swing gate motors. It features obstacle detection, a self-learning operating time function, and a programmable maintenance reminder, making it perfect for efficient swing gate automation.
£165.00 ex. VAT
V2 Vulcan 230v underground gate motor only. Also suitable as a replacement for CAME Frog® motor. Single V2 Vulcan underground Electric Gate Motor. This is One Motor ONLY. Suitable for replacing an existing V2 Vulcan 230v motor but can also be used as a direct replacement for a CAME FROG® 230v Motor and fits directly into the existing FROG® ground box Gate Weight Max. 800kg, Maximum leaf size 3.5m (7m total opening) Thermal protection 150 degrees C, Maximum opening angle 110 degrees (360 degrees with OPTIONAL chain kit) 300W motor. Environmental protection to IP67. working temp -20 to +50 degrees C. Standard opening time to 90 degrees without slow down 15 seconds . These motors can also be retrofitted to CAME® Frog foundation cases.
£237.00 ex. VAT
V2 Match Royal transmitter and copier for fixed codes 433.92 MHz
£26.25 ex. VAT
V2 Wally1 Single Channel Stand Alone Radio Receiver
£58.24 ex. VAT
Wall-mounted photocells adjustable (180°) and synchronised 13C003 Photocell size 41 x 115 x 38
£40.46 ex. VAT
V2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 111 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 111. Please advise us if you require contract 2 or 694
£84.99 ex. VAT
TRC4 V2 Fully compatible with V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 HANDY2 HANDY4 TRC4 - Supplied as contract 111 - Rolling code transmission 433.92 MHz 4 button version,
£21.25 ex. VAT
Optimise Your Automation System with the V2 MR2 Plug-In Receiver Module
The V2 MR2 plug-in receiver module is a must-have for any automation system utilising Royal or Personal Pass series transmitters. With an impressive capacity to store up to 1008 codes and support for self-learning transmitters, the MR2 module ensures effortless and reliable control over your system. Simple and Versatile Programming Options Programming the V2 MR2 is designed to be user-friendly, offering both basic programming via a simple button press and advanced programming using software. This flexibility allows you to customise your automation setup according to your specific needs.£29.95 ex. VAT
The V2 SENSIVA-WL photocells are battery-powered, wall-mounted devices capable of synchronizing up to 8 pairs of units. With a 180° horizontal adjustment and 30° vertical adjustment, they offer a flexible and secure solution for automation safety. Photocell size 41 x 115 x 38
£69.50 ex. VAT
V2 Calypso 230v motor irreversible electromechanical actuator for swing gates with leaves up to 3m in length.
Product Features:- Single version for both right and left leaves- Emergency release system-400 version for leaves up to 2.5 m 22G001500 version for leaves up to 3 m 22G003600 version for leaves up to 4 m 22G016£145.00 – £240.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page230V analogue control unit for electric swing gates and sliding gates The V2 Flexy 2 is an analogue control unit for swing gates, it is special because it comes equipped with a built in receiver (433.92 MHz) Adjustment and programming by trimmer and dip-switch 230v power supply for 2 single phase motors Safety device test before any opening Start, pedestrian start and stop controls from transmitter Open/close limit switch inputs
£141.50 ex. VAT
External antenna for improved range on 433 and 868 MHz radio systems. If you are having trouble with the radio control range on your electric gate installation you may want to consider adding and external antenna. Gate remote controls work by radio not infra-red but anything between the transmitter and the control panel receiver will limit the effective range. Many of our automatic gate kits come with and internal antenna that normally gives good range but the external antenna can be fixed above the fence or gatepost giving a better line of sight to the point from which you will operate the gates. In some very rare cases other radio interference can reduce the range on an electric gate or door radio control system and an external antenna may not help in such a case but it does let you locate the antenna in a slightly different position so may still worth trying.
£24.99 ex. VAT
Miniaturized wall-mounted and pillar-mounted photocells, synchronised and self-aligning 13C002
£34.99 ex. VAT
Gate mounted ram kit for two swing electric gates up to 2.5m per gate Each kit pack contains: 2 electromechanical actuators V2 Calypso - 1 Flexy2 control unit with super-heterodyne radio receiver - 2 remote control transmitters - Internal radio antenna & 1 pair of infra-red photocells for safety The V2 Calypso 400 automatic gate kit is suitable for residential and light commercial gate installations. These stylish Italian gate rams will allow you to automate a pair of gates to a high quality standard at a very reasonable price. The instructions are available for download below but please do not hesitate to contact us if you require any information.
£450.00 ex. VAT
Bolt on post bracket suitable for mounting V2 Calypso Electric Gate Motor
£18.00 ex. VAT
V2 Wally2 Two Channel Stand Alone Radio Receiver
£58.99 ex. VAT
