Electric Gate Kits & Automation | SHOP
Showing 21–40 of 295 resultsSorted by popularity
FiltersV2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 111 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 111. Please advise us if you require contract 2 or 694
£84.99 (£101.99 incl VAT)
Optimise Your Automation System with the V2 MR2 Plug-In Receiver Module
The V2 MR2 plug-in receiver module is a must-have for any automation system utilising Royal or Personal Pass series transmitters. With an impressive capacity to store up to 1008 codes and support for self-learning transmitters, the MR2 module ensures effortless and reliable control over your system. Simple and Versatile Programming Options Programming the V2 MR2 is designed to be user-friendly, offering both basic programming via a simple button press and advanced programming using software. This flexibility allows you to customise your automation setup according to your specific needs.£29.95 (£35.94 incl VAT)
230V analogue control unit for electric swing gates and sliding gates The V2 Flexy 2 is an analogue control unit for swing gates, it is special because it comes equipped with a built in receiver (433.92 MHz) Adjustment and programming by trimmer and dip-switch 230v power supply for 2 single phase motors Safety device test before any opening Start, pedestrian start and stop controls from transmitter Open/close limit switch inputs
£141.50 (£169.80 incl VAT)
The V2 SENSIVA-WL photocells are battery-powered, wall-mounted devices capable of synchronizing up to 8 pairs of units. With a 180° horizontal adjustment and 30° vertical adjustment, they offer a flexible and secure solution for automation safety. Photocell size 41 x 115 x 38
£69.50 (£83.40 incl VAT)
V2 Calypso 230v motor irreversible electromechanical actuator for swing gates with leaves up to 3m in length.
Product Features:- Single version for both right and left leaves- Emergency release system-400 version for leaves up to 2.5 m 22G001500 version for leaves up to 3 m 22G003600 version for leaves up to 4 m 22G016£145.00 – £240.00
Select options This product has multiple variants. The options may be chosen on the product pageBolt on Nylon toothed rack for sliding electric gates.
£11.95 (£14.34 incl VAT)
1.5mtr mechanical safety edge can be hard wired to the control panel or used in conjunction with our wireless safety beams as an enhanced safety system for sliding gates. Hard wired or can be connected with a wireless edge kit available separately. Can be cut to size.
£47.66 (£57.19 incl VAT)
AM1 PAD Wired Stand alone access control keypad, Backlight, 1000 users, 2 output relays, suitable for electric gates or door access. AM1 PADÂ Stand alone access control keypad, backlighted, 1000 users, 2 output relays, 12/24Vdc, optical tamper 12 or 24v supply.
Operating conditions:
Temperature: -20°C to +50°C
RH: ≤95%
Power and voltage requirements:
DC input: 12V to 24V
AC input: 12V to 24V
Standby current: ≤20 mA
Operating current : ≤50 mA£82.99 (£99.59 incl VAT)
Replacement Drive Arm for underground electric gate motors such as the On Automation Idro 300, Terra, Liftmaster Sub 300 and may more
£19.00 (£22.80 incl VAT)
10uf Motor Start Run Capacitor as used on SWWU300 Terra Proteco Shark Liftmaster etc
£11.95 (£14.34 incl VAT)
14uf Motor Start Run Capacitor as used on V2 Vulcan 230v and others
£12.99 (£15.59 incl VAT)
FTALL7 Ft007. Photocells (TX / RX) infrared modulated light, range up to 25m and new sophisticated pcb designed to ensure the maximum Immunity to disturbances and interference. Synchronized photocells
£29.00 (£34.80 incl VAT)
24v Sliding Gate Motor Kit for electric sliding gates up to 1000 Kg Motor and Control board only - No remote controls or safety beam supplied
£344.00 (£412.80 incl VAT)
Open & Close Stops for Terra SWU300 Underground electric gate motor
£26.00 (£31.20 incl VAT)
Wireless transmitter / receiver kit for moving safety edges on electric gates Wireless safety edge kit for mechanical or resistive safety edge. Transmitter unit is battery powered and is fixed to the safety edge on the gate and the receiver unit is mounted with the gate control panel. This handy kit comes complete with weatherproof enclosures, cable glands, batteries etc.
£94.80 (£113.76 incl VAT)
PHOX4 Button keyfob remote. Fully compatible with older autoroll V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY on contract 597 as previously used by Auto-Roll
£24.96 (£29.95 incl VAT)
TRC4 V2 Fully compatible with V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4Â HANDY2 HANDY4 TRC4 - Supplied as contract 111 -Â Rolling code transmission 433.92 MHz 4 button version,
£21.25 (£25.50 incl VAT)
V2 Wally2 Two Channel Stand Alone Radio Receiver
£58.99 (£70.79 incl VAT)
BIOS2 Control units for 2 gearmotor 230 Vac with object detection, lock control and safety edge input Main characteristics:
- Control unit with managing of a transmitter through the display.
- Extractable memory and terminal boards.
- Electronic torque adjustment.
- Learning up to 1000 transmitters.
- Functions selection through display.
- Self–learning of strokes.
- Differentiable slowing downs during opening and closing phase.
- Adjustable obstacle detection.
- Self-diagnosis of safety devices.
- Led for inputs status.
- Radio receiver module.
- Inputs: open button, close button, step–by–step button, pedestrian button, stop button, 2 photocells and safety edge.
- Outputs: Integrated flashing circuit 230 Vac, courtesy light/open gate warning light and power supply accessories (24 Vdc)..
- Dim. (mm) W x D x H = 145 x 180 x 85 BOX
£119.50 (£143.40 incl VAT)
2mtr mechanical safety edge can be hard wired to the control panel or used in conjunction with our wireless safety beams as an enhanced safety system for sliding gates. Hard wired or can be connected with a wireless edge kit available separately. Can be cut to size.
£53.00 (£63.60 incl VAT)
