Electric Gate Kits & Automation | SHOP
Showing 21–39 of 39 resultsSorted by popularity
FiltersE-Loop inground commercial controller presence mode inground kit with ETRANS100 With the same features as the surface commercial e-LOOP, the inground unit seamlessly integrates into the pavement, creating a sleek and unobtrusive appearance. This design eliminates any potential tripping hazards or obstructions, ensuring a safe and visually appealing environment for pedestrians and vehicles. Part Number: EL00IG-RAD-KT
£496.00 ex. VAT
The Commercial Radar E-Loop with presence mode only is an e-loop that uses magnetometer sensors and radar to ensure transmission is sent to the gate to either open or close. It is one of the safest ways to ensure any accidents do not happen near your gate. Part Number: EL00C-RAD
£419.00 ex. VAT
The Commercial Radar E-Loop with exit mode only is an e-loop that uses magnetometer sensors to ensure transmission is sent to the gate to either open or close. Part Number: EL00C
£386.00 ex. VAT
- The e-loop micro is the newest safety device from AES. This micro-sized e-loop measures only 110mm in diameter and includes an e-Trans20 transceiver. It can be used at any gate as a convenient and reliable surface-mount exit mode e-loop without the need for trenching. Part Number: EL00MIC-K
£254.00 ex. VAT
- The e-loop micro is the newest safety device from AES. This micro-sized e-loop measures only 110mm in diameter. It can be used at any gate as a convenient and reliable surface-mount exit mode e-loop without the need for trenching. Part Number: EL00MIC
£211.00 ex. VAT
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle. Note: Gate or door controller must have a dedicated open input and auto close function enabled
£563.00 ex. VAT
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle. Note: Gate or door controller must have a dedicated open input and auto close function enabled
£529.00 ex. VAT
Replaces traditional wired inductive loops, saving you time and money while increasing reliability! The e-Loop Mini is an easy bolt-in alternative for automatic vehicle detection systems. Easily installed into a new or existing gate controller, making it possible to use the e-loop mini on practically any household gate. It offers an accurate, secure, and economical solution for autonomous vehicle detection through the use of magnetic sensor technology.
£429.99 ex. VAT
Replaces traditional wired inductive loops, saving you time and money while increasing reliability! The e-Loop Mini is an easy bolt-in alternative for automatic vehicle detection systems. Easily installed into a new or existing gate controller, making it possible to use the e-loop mini on practically any household gate. It offers an accurate, secure, and economical solution for autonomous vehicle detection through the use of magnetic sensor technology.
£335.00 ex. VAT
Replaces traditional wired inductive loops, saving you time and money while increasing reliability! The e-Loop Mini is an easy bolt-in alternative for automatic vehicle detection systems. Easily installed into a new or existing gate controller, making it possible to use the e-loop mini on practically any household gate. It offers an accurate, secure, and economical solution for autonomous vehicle detection through the use of magnetic sensor technology.
£309.00 ex. VAT
The AES Cellcom Prime 7 series is an advanced GSM audio intercom system. This system has four call buttons and is, therefore, suitable for four households or businesses. This state-of-the-art GSM intercom system dials up to four phone numbers per call button in succession on roll-over whenever a visitor pushes the call button on the intercom. User friendly and hassle-free, you can have total remote management over your intercom via phone calls and free Android and iOS smartphone apps for residents and installers - wherever you are in the world.
£974.97 ex. VAT
The AES Cellcom Prime 7 series is an advanced GSM audio intercom system. This system has three call buttons and is, therefore, suitable for three households or businesses. This state-of-the-art GSM intercom system dials up to four phone numbers per call button in succession on roll-over whenever a visitor pushes the call button on the intercom. User friendly and hassle-free, you can have total remote management over your intercom via phone calls and free Android and iOS smartphone apps for residents and installers - wherever you are in the world.
£962.02 ex. VAT
The AES Cellcom Prime 7 series is an advanced GSM audio intercom system. This system has two call buttons and is, therefore, suitable for two households or businesses. This state-of-the-art GSM intercom system dials up to four phone numbers per call button in succession on roll-over whenever a visitor pushes the call button on the intercom. User friendly and hassle-free, you can have total remote management over your intercom via phone calls and free Android and iOS smartphone apps for residents and installers - wherever you are in the world.
£947.98 ex. VAT
The AES Cellcom Prime 7 series is an advanced GSM audio intercom system. This system has one call button and is, therefore, suitable for one household or business. This state-of-the-art GSM intercom system dials up to four phone numbers in succession on roll-over whenever a visitor pushes the call button on the intercom. User friendly and hassle-free, you can have total remote management over your intercom via phone calls and free Android and iOS smartphone apps for residents and installers - wherever you are in the world.
£463.99 ex. VAT
Transform your garage experience with Hörmann's revolutionary new device, designed to automate your canopy door effortlessly. This world-first innovation pairs seamlessly with the ProMatic 4 canopy operator, ensuring a smooth and reliable automatic opening of any Hörmann canopy garage door. The smartly engineered lifting arm integrates flawlessly with the existing system, allowing you to open and close your garage door at the touch of a button using advanced BiSecur radio technology. This feature not only adds convenience to your daily routine but also enhances the safety and security of your home. What sets this canopy operator apart is its ability to maintain your garage's full drive-through height, with no need for additional modifications or unsightly bow arm devices. Installation is a breeze, especially for those who already have a Hörmann canopy door. Retrofitting is quick, easy, and designed to blend perfectly with your existing setup.
Price range: £75.00 through £195.83 ex. VAT
- The AES 705-ABK wireless video intercom kit includes a stainless steel intercom panel, with a keypad and black acrylic front trim. Above the keypad is a high quality stainless steel illuminated button with speech area and a camera with night vision (infrared LEDs). With keypad for code lock access control. Metal keypad buttons with blue illumination. 3 relay outputs. 1200 code storage. IP55 weather proof design. Supports up to 3 additional audio handsets (705-EH).
£748.98 ex. VAT
- Surface mounted audio wireless intercom, curved architectural model. Constructed from BS316 marine grade stainless steel and finished with gloss black acrylic trim. Ideal for residential or commercial properties with a single entrance, it is a reliable system and is vandal resistant. Door/gate release button to open the door/gate. The long range wireless technology means that there is no need for expensive wiring throughout the building.
£367.01 ex. VAT
- Architectural Model with Keypad The 7th Generation of Prime GSM Intercom NEW upgraded version replacing Prime 6!
£592.00 ex. VAT
A five button standard sized BiSecur handset operating on 868.3MHz. Four function buttons plus enquiry button (series 3 only), backwards compatible with all Hormann operators on 868MHz 2005-2011.
£52.50 ex. VAT
