V2 Automation
Showing 13–24 of 105 resultsSorted by popularity
FiltersV2 Calypso 230v motor irreversible electromechanical actuator for swing gates with leaves up to 3m in length.
Product Features:- Single version for both right and left leaves- Emergency release system-400 version for leaves up to 2.5 m 22G001500 version for leaves up to 3 m 22G003600 version for leaves up to 4 m 22G016Price range: £145.00 through £235.00 + VAT
Select options This product has multiple variants. The options may be chosen on the product pageThe V2 SENSIVA-WL photocells are battery-powered, wall-mounted devices capable of synchronizing up to 8 pairs of units. With a 180° horizontal adjustment and 30° vertical adjustment, they offer a flexible and secure solution for automation safety. Photocell size 41 x 115 x 38
£69.50 + VAT
230V analogue control unit for electric swing gates and sliding gates The V2 Flexy 2 is an analogue control unit for swing gates, it is special because it comes equipped with a built in receiver (433.92 MHz) Adjustment and programming by trimmer and dip-switch 230v power supply for 2 single phase motors Safety device test before any opening Start, pedestrian start and stop controls from transmitter Open/close limit switch inputs
Original price was: £188.68.£89.99Current price is: £89.99. + VAT
V2 Wally2 Two Channel Stand Alone Radio Receiver
Original price was: £102.77.£38.75Current price is: £38.75. + VAT
External antenna for improved range on 433 and 868 MHz radio systems. If you are having trouble with the radio control range on your electric gate installation you may want to consider adding and external antenna. Gate remote controls work by radio not infra-red but anything  between the transmitter and the control panel receiver will limit the effective range. Many of our automatic gate kits come with and internal antenna that normally gives good range but the external antenna can be fixed above the  fence or gatepost giving a better line of sight to the point from which you will operate the gates. In some very rare cases other radio interference can reduce the range on an electric gate or door radio control system and an external antenna may not help in such a case but it does let you locate the antenna in a slightly different position so may still worth trying.
£24.99 + VAT
Gate mounted ram kit for two swing electric gates up to 2.5m per gate Each kit pack contains: 2 electromechanical actuators V2 Calypso - 1 Flexy2 control unit with super-heterodyne radio receiver - 2 remote control transmitters - Internal radio antenna & 1 pair of infra-red photocells for safety The V2 Calypso 400 automatic gate kit is suitable for residential and light commercial gate installations. These stylish Italian gate rams will allow you to automate a pair of gates to a high quality standard at a very reasonable price. The instructions are available for download below but please do not hesitate to contact us if you require any information.
Original price was: £435.00.£395.00Current price is: £395.00. + VAT
PHOX4 Button keyfob remote. Fully compatible with older autoroll V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY on contract 597 as previously used by Auto-Roll
+ VATMiniaturized wall-mounted and pillar-mounted photocells, synchronised and self-aligning 13C002
£34.99 + VAT
V2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 694 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 694. Please advise us if you require contract 2 or 111
£84.99 + VAT
Bolt on post bracket suitable for mounting V2 Calypso Electric Gate Motor
£18.00 + VAT
V2 Vulcan 230v Underground Gate Automation Kit Vulcan Kit Includes2 x Vulcan motors 2 x Foundation boxes with steel lids. 2 x 110 degree lever arms 2 x Manual release keys1 x Control unit 1 x Pair of photocells 2 x Remote controls SpecificationsWeight:Â 64.06 kg Length:Â 398.0mm Width:Â 328.0mm Depth:Â 164.0mm Gate: Max Gate Weight:Â 800.0kg Max Gate Width:Â 3.5m
Original price was: £1,297.69.£1,125.00Current price is: £1,125.00. + VAT
Optional Internal Gate Stop for V2 STARK3 Gate Ram 162258
£16.66 + VAT
