Electric Gate Kits & Automation | SHOP
Showing 21–40 of 162 resultsSorted by popularity
FiltersWireless transmitter / receiver kit for moving safety edges on electric gates Wireless safety edge kit for mechanical or resistive safety edge. Transmitter unit is battery powered and is fixed to the safety edge on the gate and the receiver unit is mounted with the gate control panel. This handy kit comes complete with weatherproof enclosures, cable glands, batteries etc.
£94.80 ex. VAT
The V2 SENSIVA-WL photocells are battery-powered, wall-mounted devices capable of synchronizing up to 8 pairs of units. With a 180° horizontal adjustment and 30° vertical adjustment, they offer a flexible and secure solution for automation safety. Photocell size 41 x 115 x 38
£69.50 ex. VAT
230V analogue control unit for electric swing gates and sliding gates The V2 Flexy 2 is an analogue control unit for swing gates, it is special because it comes equipped with a built in receiver (433.92 MHz) Adjustment and programming by trimmer and dip-switch 230v power supply for 2 single phase motors Safety device test before any opening Start, pedestrian start and stop controls from transmitter Open/close limit switch inputs
Original price was: £188.68.£89.99Current price is: £89.99. ex. VAT
V2 Calypso 230v motor irreversible electromechanical actuator for swing gates with leaves up to 3m in length.
Product Features:- Single version for both right and left leaves- Emergency release system-400 version for leaves up to 2.5 m 22G001500 version for leaves up to 3 m 22G003600 version for leaves up to 4 m 22G016Price range: £145.00 through £240.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product pageAM1 PAD Wired Stand alone access control keypad, Backlight, 1000 users, 2 output relays, suitable for electric gates or door access. AM1 PADÂ Stand alone access control keypad, backlighted, 1000 users, 2 output relays, 12/24Vdc, optical tamper 12 or 24v supply.
Operating conditions:
Temperature: -20°C to +50°C
RH: ≤95%
Power and voltage requirements:
DC input: 12V to 24V
AC input: 12V to 24V
Standby current: ≤20 mA
Operating current : ≤50 mAOriginal price was: £108.33.£88.32Current price is: £88.32. ex. VAT
V2 Wally2 Two Channel Stand Alone Radio Receiver
Original price was: £102.77.£38.75Current price is: £38.75. ex. VAT
1.5mtr mechanical safety edge can be hard wired to the control panel or used in conjunction with our wireless safety beams as an enhanced safety system for sliding gates. Hard wired or can be connected with a wireless edge kit available separately. Can be cut to size.
£59.00 ex. VAT
PHOX4 Button keyfob remote. Fully compatible with older autoroll V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY on contract 597 as previously used by Auto-Roll
ex. VAT24v Sliding Gate Motor Kit for electric sliding gates up to 1000 Kg Motor and Control board only - No remote controls or safety beam supplied
£299.00 ex. VAT
Bolt on post bracket suitable for mounting V2 Calypso Electric Gate Motor
£18.00 ex. VAT
BIOS2 Control units for 2 gearmotor 230 Vac with object detection, lock control and safety edge input Main characteristics:
- Control unit with managing of a transmitter through the display.
- Extractable memory and terminal boards.
- Electronic torque adjustment.
- Learning up to 1000 transmitters.
- Functions selection through display.
- Self–learning of strokes.
- Differentiable slowing downs during opening and closing phase.
- Adjustable obstacle detection.
- Self-diagnosis of safety devices.
- Led for inputs status.
- Radio receiver module.
- Inputs: open button, close button, step–by–step button, pedestrian button, stop button, 2 photocells and safety edge.
- Outputs: Integrated flashing circuit 230 Vac, courtesy light/open gate warning light and power supply accessories (24 Vdc)..
- Dim. (mm) W x D x H = 145 x 180 x 85 BOX
£119.50 ex. VAT
External antenna for improved range on 433 and 868 MHz radio systems. If you are having trouble with the radio control range on your electric gate installation you may want to consider adding and external antenna. Gate remote controls work by radio not infra-red but anything  between the transmitter and the control panel receiver will limit the effective range. Many of our automatic gate kits come with and internal antenna that normally gives good range but the external antenna can be fixed above the  fence or gatepost giving a better line of sight to the point from which you will operate the gates. In some very rare cases other radio interference can reduce the range on an electric gate or door radio control system and an external antenna may not help in such a case but it does let you locate the antenna in a slightly different position so may still worth trying.
£24.99 ex. VAT
V2 Vulcan 230v Underground Gate Automation Kit Vulcan Kit Includes2 x Vulcan motors 2 x Foundation boxes with steel lids. 2 x 110 degree lever arms 2 x Manual release keys1 x Control unit 1 x Pair of photocells 2 x Remote controls SpecificationsWeight:Â 64.06 kg Length:Â 398.0mm Width:Â 328.0mm Depth:Â 164.0mm Gate: Max Gate Weight:Â 800.0kg Max Gate Width:Â 3.5m
Original price was: £1,297.69.£1,062.50Current price is: £1,062.50. ex. VAT
Gate mounted ram kit for two swing electric gates up to 2.5m per gate Each kit pack contains: 2 electromechanical actuators V2 Calypso - 1 Flexy2 control unit with super-heterodyne radio receiver - 2 remote control transmitters - Internal radio antenna & 1 pair of infra-red photocells for safety The V2 Calypso 400 automatic gate kit is suitable for residential and light commercial gate installations. These stylish Italian gate rams will allow you to automate a pair of gates to a high quality standard at a very reasonable price. The instructions are available for download below but please do not hesitate to contact us if you require any information.
£450.00 ex. VAT
Miniaturized wall-mounted and pillar-mounted photocells, synchronised and self-aligning 13C002
£34.99 ex. VAT
Allmatic SO400 Gate Motor - 230v Single Gate Electric Gate Ram. Electromechanical irreversible gearmotor 230Vac. High performance electrical motor. Refined mechanics with a 4 thread endless screw for wings up to 2.5m. Mounting bracket included. These Motors are handed left and right - marked S or D on the motor case casting - please advise which you require
£195.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product pageTerra underground automation kit for a pair of Electric gates Terra 230v Underground Gate Automation Kit Terra Kit Includes 2 x Terra motors 2 x Foundation boxes with steel lids. 2 x 110 degree lever arms 2 x Manual release keys1 x Control unit 1 x Pair of photocells 2 x Remote controls Specifications Weight:Â 64.06 kg Length:Â 398.0mm Width:Â 328.0mm Depth:Â 164.0mm Gate: Max Gate Weight:Â 400.0kg Max Gate Width:Â 3.5m
Original price was: £833.33.£750.00Current price is: £750.00. ex. VAT
V2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 694 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 694. Please advise us if you require contract 2 or 111
£84.99 ex. VAT
24v Sliding Gate Motor Kit for electric sliding gates up to 1000 Kg Supplied with two remote controls and safety beam
Original price was: £582.50.£425.00Current price is: £425.00. ex. VAT
Modulated infrared photocell composed of a battery-powered transmitter (wireless), with 2 integrated 1.5V AA batteries, and a receiver (powered by 12-24 Vac / Vdc source). EDGE FUNCTION: the wireless transmitter (Tx), it is equipped with an input for the connection […]
ex. VAT
