Electric Gate Kits & Automation | SHOP
Showing 41–80 of 247 resultsSorted by popularity
Filters10uf Motor Start Run Capacitor as used on SWWU300 Terra Proteco Shark Liftmaster etc
£12.05 + VAT
14uf Motor Start Run Capacitor as used on V2 Vulcan 230v and others
£12.99 + VAT
External antenna for improved range on 433 and 868 MHz radio systems. If you are having trouble with the radio control range on your electric gate installation you may want to consider adding and external antenna. Gate remote controls work by radio not infra-red but anything  between the transmitter and the control panel receiver will limit the effective range. Many of our automatic gate kits come with and internal antenna that normally gives good range but the external antenna can be fixed above the  fence or gatepost giving a better line of sight to the point from which you will operate the gates. In some very rare cases other radio interference can reduce the range on an electric gate or door radio control system and an external antenna may not help in such a case but it does let you locate the antenna in a slightly different position so may still worth trying.
£24.99 + VAT
Gate mounted ram kit for two swing electric gates up to 2.5m per gate Each kit pack contains: 2 electromechanical actuators V2 Calypso - 1 Flexy2 control unit with super-heterodyne radio receiver - 2 remote control transmitters - Internal radio antenna & 1 pair of infra-red photocells for safety The V2 Calypso 400 automatic gate kit is suitable for residential and light commercial gate installations. These stylish Italian gate rams will allow you to automate a pair of gates to a high quality standard at a very reasonable price. The instructions are available for download below but please do not hesitate to contact us if you require any information.
Original price was: £435.00.£395.00Current price is: £395.00. + VAT
Wire able radio receiver unit to add our RGCTX4-433 transmitter and our keypad to existing electric gates and garage doors This receiver will also accept a large number of fixed and rolling code 433 mhz transmitters from other manufacturers
Original price was: £16.66.£14.16Current price is: £14.16. + VAT
Replacement link bar for underground electric gate motors such as the On Automation Idro 300, Terra, Liftmaster Sub 300 and may more
£19.00 + VAT
BIOS 1 230v Control Panel Only Replacement Spare Part
£95.00 + VAT
Allmatic SO400 Gate Motor - 230v Single Gate Electric Gate Ram. Electromechanical irreversible gearmotor 230Vac. High performance electrical motor. Refined mechanics with a 4 thread endless screw for wings up to 2.5m. Mounting bracket included. These Motors are handed left and right - marked S or D on the motor case casting - please advise which you require
£195.00 + VAT
Select options This product has multiple variants. The options may be chosen on the product pagePHOX4 Button keyfob remote. Fully compatible with older autoroll V2 Phoenix 2 & Phoenix 4 transmitters as well as TSC4 TRC4 HANDY on contract 597 as previously used by Auto-Roll
+ VATV2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 694 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 694. Please advise us if you require contract 2 or 111
£84.99 + VAT
Solid metal frame, vandal-proof and tamper-proof, up to 1,000 user and/or transponder code programmable.
Original price was: £41.66.£37.49Current price is: £37.49. + VAT
Proximity tag for use with keypad and other access control systems.
£2.00 + VAT
Miniaturized wall-mounted and pillar-mounted photocells, synchronised and self-aligning 13C002
£34.99 + VAT
Chain Drive Kit for up to 180 degree opening
£109.99 + VAT
BIOS2 Control units for 2 gearmotor 230 Vac with object detection, lock control and safety edge input Main characteristics:
- Control unit with managing of a transmitter through the display.
- Extractable memory and terminal boards.
- Electronic torque adjustment.
- Learning up to 1000 transmitters.
- Functions selection through display.
- Self–learning of strokes.
- Differentiable slowing downs during opening and closing phase.
- Adjustable obstacle detection.
- Self-diagnosis of safety devices.
- Led for inputs status.
- Radio receiver module.
- Inputs: open button, close button, step–by–step button, pedestrian button, stop button, 2 photocells and safety edge.
- Outputs: Integrated flashing circuit 230 Vac, courtesy light/open gate warning light and power supply accessories (24 Vdc)..
- Dim. (mm) W x D x H = 145 x 180 x 85 BOX
£119.50 + VAT
Terra underground automation kit for a pair of Electric gates Terra 230v Underground Gate Automation Kit Terra Kit Includes 2 x Terra motors 2 x Foundation boxes with steel lids. 2 x 110 degree lever arms 2 x Manual release keys1 x Control unit 1 x Pair of photocells 2 x Remote controls Specifications Weight:Â 64.06 kg Length:Â 398.0mm Width:Â 328.0mm Depth:Â 164.0mm Gate: Max Gate Weight:Â 400.0kg Max Gate Width:Â 3.5m
Original price was: £833.33.£750.00Current price is: £750.00. + VAT
V2 Vulcan 230v Underground Gate Automation Kit Vulcan Kit Includes2 x Vulcan motors 2 x Foundation boxes with steel lids. 2 x 110 degree lever arms 2 x Manual release keys1 x Control unit 1 x Pair of photocells 2 x Remote controls SpecificationsWeight:Â 64.06 kg Length:Â 398.0mm Width:Â 328.0mm Depth:Â 164.0mm Gate: Max Gate Weight:Â 800.0kg Max Gate Width:Â 3.5m
Original price was: £1,297.69.£1,125.00Current price is: £1,125.00. + VAT
Universal Remote Control Kit for addition to exiting Electric Gate and Garage Door Systems
Original price was: £37.50.£31.66Current price is: £31.66. + VAT
24v Sliding Gate Motor Kit for electric sliding gates up to 1000 Kg Motor and Control board only - No remote controls or safety beam supplied
£299.00 + VAT
Bolt on post bracket suitable for mounting V2 Calypso Electric Gate Motor
£18.00 + VAT
Transform your garage experience with Hörmann's revolutionary new device, designed to automate your canopy door effortlessly. This world-first innovation pairs seamlessly with the ProMatic 4 canopy operator, ensuring a smooth and reliable automatic opening of any Hörmann canopy garage door. The smartly engineered lifting arm integrates flawlessly with the existing system, allowing you to open and close your garage door at the touch of a button using advanced BiSecur radio technology. This feature not only adds convenience to your daily routine but also enhances the safety and security of your home. What sets this canopy operator apart is its ability to maintain your garage's full drive-through height, with no need for additional modifications or unsightly bow arm devices. Installation is a breeze, especially for those who already have a Hörmann canopy door. Retrofitting is quick, easy, and designed to blend perfectly with your existing setup.
+ VATSO400/IT OPERATOR FOR SWING GATES WITH WINGS UP TO 3m MAX WEIGHT OR UP TO 350Kg. IDEAL FOR RESIDENTIAL USE.
Mounting brackets included.
SO400/IT version 230VacTwo motors, Two remote Controls and fixing brackets. One set of safety photocells and with BIOS 2 Eco Control unit for 1 or 2 wings gate. Available also in an advanced version. Electronic torque adjustment, extractable memory, functions selection through display, self–learning of strokes, differentiable slowing downs during opening and closing phase. Control unit with managing of a transmitter through the display.
Original price was: £479.16.£379.00Current price is: £379.00. + VAT
Surface mounted digital photocell with battery, rotation up 180° and angle 5°. The surface mounted PHOTO360 DB PLUS Digital Wireless Photocells work with any system and provide the convenience where digging up the driveway for a cable at both posts is just not an option. Approx 3 years battery life depending on use.
- Includes transmitter and receiver.
- Ability to connect an 8K2 safety edge directly to the transmitter.
- Can be rotated up to 180°, angle can be adjusted 5°
+ VATHigh quality sliding gate system for gates of up to 600kg - supplied with two remote controls and an infrared safety beam. Allmatic Moveo Sliding Electric Gate Kit for gates up to 600KG Powerful 230v motor with integral transformer and control system for sliding gates giving smooth and quiet operation. Extra remote controls can be added and it is easily interfaced with home automation systems, intercoms, access control etc as required. The motor carries a seven year warranty for domestic / residential use.
Original price was: £454.17.£395.83Current price is: £395.83. + VAT
Optional Internal Gate Stop for V2 STARK3 Gate Ram 162258
£16.66 + VAT
Hormann Type K (short) Boom – 2475mm Travel Length Suitable for all SupraMatic and ProMatic garage door opener heads
- Up-and-over doors up to 2500 mm high
- Sectional doors with track application N up to 2250 mm high
- Sectional doors with track application L/Z/H up to 2125 mm high
- Total length 3200 mm, travel distance 2475 mm
Original price was: £173.00.£85.00Current price is: £85.00. + VAT
Remotely open, latch and close powered entrances using only your mobile phone! Whether you’re managing a distribution centre, a secure storage facility, a busy lorry park, or just your own home the Command Unit GSM Switch by Telguard has got your back. With just a few taps on the GCU Companion app, you can set up and manage access permissions and control  remote entry to your facility – all from the comfort of your own smartphone.
+ VATRadio keyboard Rolling Code 10 channels - 99 Users forr use with Allmatic Receivers and Control Panels for Electric Gates, Barriers and Doors • Box in ABS with protection rating IP65. • 10 channels. • Polycarbonate backlit function keys. Led status for a fast and simple programming. 9 V battery power supply and/or 12/24 Vac/dc power
£62.95 + VAT
Modulated infrared photocell composed of a battery-powered transmitter (wireless), with 2 integrated 1.5V AA batteries, and a receiver (powered by 12-24 Vac / Vdc source). EDGE FUNCTION: the wireless transmitter (Tx), it is equipped with an input for the connection […]
+ VATElectric Sliding Gate Kit with two keyfob remote controls and one set of infra red safety beams
Â
Â
Â
Original price was: £725.35.£495.00Current price is: £495.00. + VAT
24v Sliding Gate Motor Kit for electric sliding gates up to 1000 Kg Supplied with two remote controls and safety beam
Original price was: £582.50.£425.00Current price is: £425.00. + VAT
1.5 amp 12v Power Supply suitable for electric gate locks, access control and other accessories where a 230v supply is available and 12v DC required. Please check power requirements of items before use.
£17.25 + VAT
Product Code: CN30 Rolling Center cylindrical nylon roller for sliding gate support
£4.87 + VAT
Rolling Center RNF 40 plain nylon wheels with bearing and threaded pin for sliding gates 40mm
£9.42 + VAT
BIOS2 ECO Control units for 2 gearmotor 230 Vac Main characteristics: Control unit with managing of a transmitter through the display. Extractable memory and terminal boards. Electronic torque adjustment. Learning up to 1000 transmitters. Functions selection through display. Self–learning of strokes. Differentiable slowing downs during opening and closing phase. Led for inputs status. Optional R2 card for the managing of courtesy light / open gate warning light and electrical lock. Radio receiver module. Inputs: open button, close button, step–by–step button, pedestrian button, stop button and 2 photocells. Outputs: Integrated flashing circuit 230 Vac, courtesy light/open gate warning light, electrical lock and power supply accessories (24 Vdc). Dim. (mm) W x D x H = 145 x 180 x 85 BOX
£99.99 + VAT
Preformed ground loop is suitable for use with most inductive loop detectors.
£26.69 + VAT
Terra foundation box complete with lid and levers to house Terra underground electric gate motor.
£175.00 + VAT
V06 - Universal - Rotating dead-bolt Electric Gate Lock with 1/2 Euro cylinder lock and keys
£89.50 + VAT
926 PSO 90mm diameter o-groove wheel with 2 bearings and suppor Rolling Center 926PSO wheel to suit 20mm o-groove sliding gate tracks, recess in wheel with support H:90 x W:140 x D:34 mm. weight loadings of 300kg per wheel. To be used with: IBBI, SISTEMA, OMEGA, NEWOMEGA, HEAVY & FLOOR sliding gate o-grove tracks.
£18.41 + VAT
826 PSO 80mm diameter o-groove wheel with 2 bearings and suppor Rolling Center 826PSO wheel to suit 20mm o-groove sliding gate tracks, recess in wheel with support H:80 x W:140 x D:34 mm. weight loadings of 280kg per wheel. To be used with: IBBI, SISTEMA, OMEGA, NEWOMEGA, HEAVY & FLOOR sliding gate o-grove tracks.
£16.00 + VAT
