Electric Gate Kits & Automation | SHOP
Showing 1–20 of 32 resultsSorted by price: high to low
Filters- E-Loop Commercial Presence Mode with E-TRANS-Plus, I-Gate-PlusPart Number: ELOOC-RAD-KPTAES E-loop commercial Exit and presence mode with I-GATE PLUS Get more out of the e-Loop by connecting the e-Trans plus plug-in. This device plugs into our latest I-gate unit the I-Gate-Plus, which gives the user extra features. • Set auto relay times. • Set do not disturb times. • SMS low battery notification. • Set e-Loop lock-outtimes. • Program mode. AES E-loop Inground Exit with I-GATE PLUS • 1 x e-Loop inground Exit mode. • 1 x e-Trans-Plus (Plug in). • 1 x I-Gate-Plus. • 1x Magnet. Introducing a new concept in wireless vehicle detection. The inground e-Loop replaces traditional wired inductive loops, saving time and money while increasing reliability. Installation in 3 simple steps 1. Code in the e-Loop. 2. Core bore 89mm hole 70mm deep and secure using flexible mastic. 3. Calibrate the e-Loop… and you’re ready to operate in less than 30minutes. Save many hours of installation time compared to wired loop systems. Features • High security 128 bitencryption. • Quick and easy installation. • Recesses into the driveway. • Not affected by ground movement. • 14500 mA battery giving up to 10 years battery life. • Top access for changing battery. • Up to 50 metres range. The AES IGate Plus is packed with the below features 1200 Numbers for caller ID access Trigger, latch and unlatch gates by SMS or with app Auto call feature to schedule outgoing call (prevents SIM card being deactivated) Activity log feature Includes 7 day time clock. Check stored numbers by SMS. 1 Volt free momentary relay output Check relay status SMS passcode access for non stored numbers Store up to four phone numbers to receive SMS alerts each time the unit is used to grant access. Program times for the relay(s) to operate automatically.Note: Gate or door controller must have a dedicated open input and auto close function enabled
£652.00 (£782.40 incl VAT)
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle. Note: Gate or door controller must have a dedicated open input and auto close function enabled
£563.00 (£675.60 incl VAT)
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle. Note: Gate or door controller must have a dedicated open input and auto close function enabled
£529.00 (£634.80 incl VAT)
E-Loop inground commercial controller presence mode inground kit with ETRANS100 With the same features as the surface commercial e-LOOP, the inground unit seamlessly integrates into the pavement, creating a sleek and unobtrusive appearance. This design eliminates any potential tripping hazards or obstructions, ensuring a safe and visually appealing environment for pedestrians and vehicles. Part Number: EL00IG-RAD-KT
£496.00 (£595.20 incl VAT)
Replaces traditional wired inductive loops, saving you time and money while increasing reliability! The e-Loop Mini is an easy bolt-in alternative for automatic vehicle detection systems. Easily installed into a new or existing gate controller, making it possible to use the e-loop mini on practically any household gate. It offers an accurate, secure, and economical solution for autonomous vehicle detection through the use of magnetic sensor technology.
£430.00 (£516.00 incl VAT)
The Commercial Inground Loop is a radar inground wireless vehicle detection system that uses magnetometer sensors and radar to ensure the transmission is sent to the gate to open. It is one of the safest ways to ensure any accidents do not happen near your gate. This is a presence mode-only sensor. Part Number: EL00IG-RAD
£419.00 (£502.80 incl VAT)
The Commercial Radar E-Loop with presence mode only is an e-loop that uses magnetometer sensors and radar to ensure transmission is sent to the gate to either open or close. It is one of the safest ways to ensure any accidents do not happen near your gate. Part Number: EL00C-RAD
£419.00 (£502.80 incl VAT)
- The Commercial Inground Loop is an inground wireless vehicle detection system that uses magnetometer sensors to ensure transmission is sent to the gate to either open or close. It is one of the safest ways to ensure any accidents do not happen near your gate. This is an exit-mode-only model.Part Number: EL00IG
£386.00 (£463.20 incl VAT)
The Commercial Radar E-Loop with exit mode only is an e-loop that uses magnetometer sensors to ensure transmission is sent to the gate to either open or close. Part Number: EL00C
£386.00 (£463.20 incl VAT)
Replaces traditional wired inductive loops, saving you time and money while increasing reliability! The e-Loop Mini is an easy bolt-in alternative for automatic vehicle detection systems. Easily installed into a new or existing gate controller, making it possible to use the e-loop mini on practically any household gate. It offers an accurate, secure, and economical solution for autonomous vehicle detection through the use of magnetic sensor technology.
£335.00 (£402.00 incl VAT)
Replaces traditional wired inductive loops, saving you time and money while increasing reliability! The e-Loop Mini is an easy bolt-in alternative for automatic vehicle detection systems. Easily installed into a new or existing gate controller, making it possible to use the e-loop mini on practically any household gate. It offers an accurate, secure, and economical solution for autonomous vehicle detection through the use of magnetic sensor technology.
£309.00 (£370.80 incl VAT)
The e-Trans 100 is a two-channel long-range wireless transceiver that can work with both gates or automatic doors. The small design allows it to be easily installed without compromising on the range. Part Number: ETRANS100
£262.00 (£314.40 incl VAT)
- The e-loop micro is the newest safety device from AES. This micro-sized e-loop measures only 110mm in diameter and includes an e-Trans20 transceiver. It can be used at any gate as a convenient and reliable surface-mount exit mode e-loop without the need for trenching. Part Number: EL00MIC-K
£254.00 (£304.80 incl VAT)
- The e-loop micro is the newest safety device from AES. This micro-sized e-loop measures only 110mm in diameter. It can be used at any gate as a convenient and reliable surface-mount exit mode e-loop without the need for trenching. Part Number: EL00MIC
£211.00 (£253.20 incl VAT)
Wireless transmitter / receiver kit for moving safety edges on electric gates Wireless safety edge kit for mechanical or resistive safety edge. Transmitter unit is battery powered and is fixed to the safety edge on the gate and the receiver unit is mounted with the gate control panel. This handy kit comes complete with weatherproof enclosures, cable glands, batteries etc.
£94.80 (£113.76 incl VAT)
The single channel inductive loop detector senses the presence of a vehicle passing over a ground loop and provides information to the electric gates control panel. The A1H-U rail mount, vehicle loop detector is compatible with most gate operators. The A1H-U may be used in Safety and Exit loop positions. The display feature makes set-up easy by displaying the optimum sensitivity setting required to detect a vehicle positioned on the loop. Ten sensitivity settings allow for fine adjustment of detection level. The A1H-U provides relay contact outputs indicating vehicle presence. The A1H-U features automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence. Four frequency settings provide flexibility in preventing crosstalk in multi-loop applications.
£89.00 (£106.80 incl VAT)
V2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 694 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 694. Please advise us if you require contract 2 or 111
£84.99 (£101.99 incl VAT)
V2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 111 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 111. Please advise us if you require contract 2 or 694
£84.99 (£101.99 incl VAT)
Vulcan Underground Electric Gate Motor encoder unit with 2m cable 161212
£61.66 (£73.99 incl VAT)
2mtr mechanical safety edge can be hard wired to the control panel or used in conjunction with our wireless safety beams as an enhanced safety system for sliding gates. Hard wired or can be connected with a wireless edge kit available separately. Can be cut to size.
£53.00 (£63.60 incl VAT)