Electric Gate Kits & Automation | SHOP
Showing 1–20 of 90 resultsSorted by popularity
FiltersToothed rack for sliding electric gates supplied with weld on fixing stays
£11.95 ex. VAT
Terra underground electric gate motor Terra Underground Gate Motor Spare Part Also known as or similar to, Ground 250, Liftmaster Chamberlain, SUB 200, Automat, Matt, Lievore Ground 250, Ground 250, Quiko QK-SUB220, V2 Terra, Liftmaster Chamberlain SUB300 Series, SUB-300, SUB300K, Proteco Shark (1st Generation Only!), Elite, Sub-300 Series, Coel 148200, SUB300M, Liftmaster UGO300, UGO300M. 230V AC 350W Uses 10uF Capacitor
£224.99 ex. VAT
The V2 City1 EVO is a highly functional control unit designed for 230V swing gate motors. It features obstacle detection, a self-learning operating time function, and a programmable maintenance reminder, making it perfect for efficient swing gate automation.
£165.00 ex. VAT
V2 Vulcan 230v underground gate motor only. Also suitable as a replacement for CAME Frog® motor. Single V2 Vulcan underground Electric Gate Motor. This is One Motor ONLY. Suitable for replacing an existing V2 Vulcan 230v motor but can also be used as a direct replacement for a CAME FROG® 230v Motor and fits directly into the existing FROG® ground box Gate Weight Max. 800kg, Maximum leaf size 3.5m (7m total opening) Thermal protection 150 degrees C, Maximum opening angle 110 degrees (360 degrees with OPTIONAL chain kit) 300W motor. Environmental protection to IP67. working temp -20 to +50 degrees C. Standard opening time to 90 degrees without slow down 15 seconds . These motors can also be retrofitted to CAME® Frog foundation cases.
£237.00 ex. VAT
The FT25B photocell, derived from the FOTO30-B, is designed for installation on all types of automated access. Its main feature is that the transmitter can be battery-powered. The transmitter also incorporates an input for a safety profile.
£46.66 ex. VAT
FTALL7 Ft007. Photocells (TX / RX) infrared modulated light, range up to 25m and new sophisticated pcb designed to ensure the maximum Immunity to disturbances and interference. Synchronized photocells
£29.00 ex. VAT
Bolt on Nylon toothed rack for sliding electric gates.
£11.95 ex. VAT
Open & Close Stops for Terra SWU300 Underground electric gate motor
£26.00 ex. VAT
Complete Universal Remote Control Kit for addition to exiting Electric Gate and Garage Door Systems
£49.96 ex. VAT
V2 Calypso 230v motor irreversible electromechanical actuator for swing gates with leaves up to 3m in length.
Product Features:- Single version for both right and left leaves- Emergency release system-400 version for leaves up to 2.5 m 22G001500 version for leaves up to 3 m 22G003600 version for leaves up to 4 m 22G016£145.00 – £240.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page10uf Motor Start Run Capacitor as used on SWWU300 Terra Proteco Shark Liftmaster etc
£12.05 ex. VAT
230V analogue control unit for electric swing gates and sliding gates The V2 Flexy 2 is an analogue control unit for swing gates, it is special because it comes equipped with a built in receiver (433.92 MHz) Adjustment and programming by trimmer and dip-switch 230v power supply for 2 single phase motors Safety device test before any opening Start, pedestrian start and stop controls from transmitter Open/close limit switch inputs
£141.50 ex. VAT
AM1 PAD Wired Stand alone access control keypad, Backlight, 1000 users, 2 output relays, suitable for electric gates or door access. AM1 PAD Stand alone access control keypad, backlighted, 1000 users, 2 output relays, 12/24Vdc, optical tamper 12 or 24v supply.
Operating conditions:
Temperature: -20°C to +50°C
RH: ≤95%
Power and voltage requirements:
DC input: 12V to 24V
AC input: 12V to 24V
Standby current: ≤20 mA
Operating current : ≤50 mA£87.99 ex. VAT
Replacement Drive Arm for underground electric gate motors such as the On Automation Idro 300, Terra, Liftmaster Sub 300 and may more
£19.00 ex. VAT
10uf Motor Start Run Capacitor as used on SWWU300 Terra Proteco Shark Liftmaster etc
£11.95 ex. VAT
14uf Motor Start Run Capacitor as used on V2 Vulcan 230v and others
£12.99 ex. VAT
BIOS2 Control units for 2 gearmotor 230 Vac with object detection, lock control and safety edge input Main characteristics:
- Control unit with managing of a transmitter through the display.
- Extractable memory and terminal boards.
- Electronic torque adjustment.
- Learning up to 1000 transmitters.
- Functions selection through display.
- Self–learning of strokes.
- Differentiable slowing downs during opening and closing phase.
- Adjustable obstacle detection.
- Self-diagnosis of safety devices.
- Led for inputs status.
- Radio receiver module.
- Inputs: open button, close button, step–by–step button, pedestrian button, stop button, 2 photocells and safety edge.
- Outputs: Integrated flashing circuit 230 Vac, courtesy light/open gate warning light and power supply accessories (24 Vdc)..
- Dim. (mm) W x D x H = 145 x 180 x 85 BOX
£119.50 ex. VAT
External antenna for improved range on 433 and 868 MHz radio systems. If you are having trouble with the radio control range on your electric gate installation you may want to consider adding and external antenna. Gate remote controls work by radio not infra-red but anything between the transmitter and the control panel receiver will limit the effective range. Many of our automatic gate kits come with and internal antenna that normally gives good range but the external antenna can be fixed above the fence or gatepost giving a better line of sight to the point from which you will operate the gates. In some very rare cases other radio interference can reduce the range on an electric gate or door radio control system and an external antenna may not help in such a case but it does let you locate the antenna in a slightly different position so may still worth trying.
£24.99 ex. VAT
Bolt on post bracket suitable for mounting V2 Calypso Electric Gate Motor
£18.00 ex. VAT
Allmatic SO400 Gate Motor - 230v Single Gate Electric Gate Ram. Electromechanical irreversible gearmotor 230Vac. High performance electrical motor. Refined mechanics with a 4 thread endless screw for wings up to 2.5m. Mounting bracket included. These Motors are handed left and right - marked S or D on the motor case casting - please advise which you require
£195.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page