Accessories
Showing 1–20 of 39 resultsSorted by popularity
FiltersThe FT25B photocell, derived from the FOTO30-B, is designed for installation on all types of automated access. Its main feature is that the transmitter can be battery-powered. The transmitter also incorporates an input for a safety profile.
£46.66 ex. VAT
FTALL7 Ft007. Photocells (TX / RX) infrared modulated light, range up to 25m and new sophisticated pcb designed to ensure the maximum Immunity to disturbances and interference. Synchronized photocells
£29.00 ex. VAT
V2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 111 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 111. Please advise us if you require contract 2 or 694
£84.99 ex. VAT
Complete Universal Remote Control Kit for addition to exiting Electric Gate and Garage Door Systems
£49.96 ex. VAT
2mtr mechanical safety edge can be hard wired to the control panel or used in conjunction with our wireless safety beams as an enhanced safety system for sliding gates. Hard wired or can be connected with a wireless edge kit available separately. Can be cut to size.
£65.00 ex. VAT
AM1 PAD Wired Stand alone access control keypad, Backlight, 1000 users, 2 output relays, suitable for electric gates or door access. AM1 PAD Stand alone access control keypad, backlighted, 1000 users, 2 output relays, 12/24Vdc, optical tamper 12 or 24v supply.
Operating conditions:
Temperature: -20°C to +50°C
RH: ≤95%
Power and voltage requirements:
DC input: 12V to 24V
AC input: 12V to 24V
Standby current: ≤20 mA
Operating current : ≤50 mA£87.99 ex. VAT
Wireless transmitter / receiver kit for moving safety edges on electric gates Wireless safety edge kit for mechanical or resistive safety edge. Transmitter unit is battery powered and is fixed to the safety edge on the gate and the receiver unit is mounted with the gate control panel. This handy kit comes complete with weatherproof enclosures, cable glands, batteries etc.
£94.80 ex. VAT
1.5mtr mechanical safety edge can be hard wired to the control panel or used in conjunction with our wireless safety beams as an enhanced safety system for sliding gates. Hard wired or can be connected with a wireless edge kit available separately. Can be cut to size.
£59.00 ex. VAT
External antenna for improved range on 433 and 868 MHz radio systems. If you are having trouble with the radio control range on your electric gate installation you may want to consider adding and external antenna. Gate remote controls work by radio not infra-red but anything between the transmitter and the control panel receiver will limit the effective range. Many of our automatic gate kits come with and internal antenna that normally gives good range but the external antenna can be fixed above the fence or gatepost giving a better line of sight to the point from which you will operate the gates. In some very rare cases other radio interference can reduce the range on an electric gate or door radio control system and an external antenna may not help in such a case but it does let you locate the antenna in a slightly different position so may still worth trying.
£24.99 ex. VAT
V2 Wireless Digital Keypad for V2 Gate and Door Systems Contract 694 This keypad can be used with all our V2 automation and remote control equipment. Powered by CR2032 battery - a secure and convenient way to add keypad entry to your electric gate installation. This is the new and improved model that replaces the TTNR and SIRMO Digit and is fully compatible with the older unit. Supplied as Contract 694. Please advise us if you require contract 2 or 111
£84.99 ex. VAT
Radio keyboard Rolling Code 10 channels - 99 Users forr use with Allmatic Receivers and Control Panels for Electric Gates, Barriers and Doors • Box in ABS with protection rating IP65. • 10 channels. • Polycarbonate backlit function keys. Led status for a fast and simple programming. 9 V battery power supply and/or 12/24 Vac/dc power
£62.95 ex. VAT
Modulated infrared photocell composed of a battery-powered transmitter (wireless), with 2 integrated 1.5V AA batteries, and a receiver (powered by 12-24 Vac / Vdc source). EDGE FUNCTION: the wireless transmitter (Tx), it is equipped with an input for the connection […]
£49.99 ex. VAT
The single channel inductive loop detector senses the presence of a vehicle passing over a ground loop and provides information to the electric gates control panel. The A1H-U rail mount, vehicle loop detector is compatible with most gate operators. The A1H-U may be used in Safety and Exit loop positions. The display feature makes set-up easy by displaying the optimum sensitivity setting required to detect a vehicle positioned on the loop. Ten sensitivity settings allow for fine adjustment of detection level. The A1H-U provides relay contact outputs indicating vehicle presence. The A1H-U features automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence. Four frequency settings provide flexibility in preventing crosstalk in multi-loop applications.
£89.00 ex. VAT
Modulated infrared photocell composed of transmitter and receiver. The optic can be adjusted on self-locking friction joints either horizontally, being able to rotate 180°, or vertically with a possible rotation of ± 10° with respect to the horizontal position.
£32.99 ex. VAT
Preformed ground loop is suitable for use with most inductive loop detectors.
£26.69 ex. VAT
Digital Wireless Photocell/beam 12-24V
£42.99 ex. VAT
Digital Wireless Photocell/beam DB Plus
£44.99 ex. VAT
Replacement Case for Prastel Photocell x(1)
£8.33 ex. VAT
Limits for Ayros Sliding Gate Motor
£65.00 ex. VAT
Vulcan Underground Electric Gate Motor encoder unit with 2m cable 161212
£61.66 ex. VAT
