Gate Safety
Showing all 6 results
FiltersWireless transmitter / receiver kit for moving safety edges on electric gates Wireless safety edge kit for mechanical or resistive safety edge. Transmitter unit is battery powered and is fixed to the safety edge on the gate and the receiver unit is mounted with the gate control panel. This handy kit comes complete with weatherproof enclosures, cable glands, batteries etc.
£94.80 (£113.76 incl VAT)
The single channel inductive loop detector senses the presence of a vehicle passing over a ground loop and provides information to the electric gates control panel. The A1H-U rail mount, vehicle loop detector is compatible with most gate operators. The A1H-U may be used in Safety and Exit loop positions. The display feature makes set-up easy by displaying the optimum sensitivity setting required to detect a vehicle positioned on the loop. Ten sensitivity settings allow for fine adjustment of detection level. The A1H-U provides relay contact outputs indicating vehicle presence. The A1H-U features automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence. Four frequency settings provide flexibility in preventing crosstalk in multi-loop applications.
£89.00 (£106.80 incl VAT)
2mtr mechanical safety edge can be hard wired to the control panel or used in conjunction with our wireless safety beams as an enhanced safety system for sliding gates. Hard wired or can be connected with a wireless edge kit available separately. Can be cut to size.
£53.00 (£63.60 incl VAT)
1.5mtr mechanical safety edge can be hard wired to the control panel or used in conjunction with our wireless safety beams as an enhanced safety system for sliding gates. Hard wired or can be connected with a wireless edge kit available separately. Can be cut to size.
£47.66 (£57.19 incl VAT)
FT00/7. Photocells (TX / RX)
£29.00 (£34.80 incl VAT)
Preformed ground loop is suitable for use with most inductive loop detectors.
£26.69 (£32.03 incl VAT)
