Gate Photocell Sensors
Photocells for Electric Gates
Photocells are an essential safety feature for any automated gate system, preventing gates from closing when obstacles are detected. These infrared beams are easy to install and create a safety barrier, ensuring that if the beam is interrupted, the gate halts movement. We offer a range of photocells from trusted brands such as Beninca, BFT, FAAC, and LiftMaster, suitable for both residential and commercial use. For optimal safety, consider using multiple sets of photocells to cover wider areas, especially for swing gates with larger opening ranges. Need assistance choosing the right photocell sensors? Call us at 01482 860950
Showing all 10 resultsSorted by popularity
FiltersThe FT25B photocell, derived from the FOTO30-B, is designed for installation on all types of automated access. Its main feature is that the transmitter can be battery-powered. The transmitter also incorporates an input for a safety profile.
£46.66 (£55.99 incl VAT)
Wall-mounted photocells adjustable (180°) and synchronised 13C003 Photocell size 41 x 115 x 38
£40.46 (£48.55 incl VAT)
The V2 SENSIVA-WL photocells are battery-powered, wall-mounted devices capable of synchronizing up to 8 pairs of units. With a 180° horizontal adjustment and 30° vertical adjustment, they offer a flexible and secure solution for automation safety. Photocell size 41 x 115 x 38
£69.50 (£83.40 incl VAT)
FTALL7 Ft007. Photocells (TX / RX) infrared modulated light, range up to 25m and new sophisticated pcb designed to ensure the maximum Immunity to disturbances and interference. Synchronized photocells
£29.00 (£34.80 incl VAT)
Miniaturized wall-mounted and pillar-mounted photocells, synchronised and self-aligning 13C002
£34.99 (£41.99 incl VAT)
Modulated infrared photocell composed of a battery-powered transmitter (wireless), with 2 integrated 1.5V AA batteries, and a receiver (powered by 12-24 Vac / Vdc source). EDGE FUNCTION: the wireless transmitter (Tx), it is equipped with an input for the connection […]
£49.99 (£59.99 incl VAT)
Modulated infrared photocell composed of transmitter and receiver. The optic can be adjusted on self-locking friction joints either horizontally, being able to rotate 180°, or vertically with a possible rotation of ± 10° with respect to the horizontal position.
£32.99 (£39.59 incl VAT)
Digital Wireless Photocell/beam 12-24V
£42.99 (£51.59 incl VAT)
Digital Wireless Photocell/beam DB Plus
£44.99 (£53.99 incl VAT)
Synchronized, adjustable (180°), wall mounted photocells with battery powered transmitter. For 24Vdc and 230V automation with inverter
£55.69 (£66.83 incl VAT)
What are Photocells for Electric Gates?
Photocells are essential safety devices used in automated gate systems to prevent accidents and damage. These devices use infrared beams to detect obstacles in the gate's path. When something interrupts the beam, the photocells send a signal to the gate's control panel to stop or reverse its movement. They are commonly used in residential and commercial gates to enhance safety for vehicles, pedestrians, and even pets. Installing multiple sets of photocells can improve coverage, especially for larger or swing gates, ensuring that no obstruction goes unnoticed.Top 5 Gate Photocell Sensor FAQs
Gate photocell sensors use infrared beams to detect obstacles and prevent gates from closing on vehicles or people. If the beam is interrupted, the gate stops moving.
Yes, photocell sensors are essential for preventing accidents by stopping gates from closing when objects are detected in their path.
Photocells should be installed on both sides of the gate, typically around 50-60 cm from the ground, to ensure proper detection of obstacles.
Yes, gate photocell sensors are compatible with both swing and sliding gates, providing safety for both types of installations.
Photocells should be cleaned and tested regularly to ensure they work properly. Dust or dirt can block the infrared beam and cause malfunction.
