Electric Gate Kits & Automation | SHOP
Showing 1–20 of 32 results
Filters- Surface mounted audio wireless intercom, curved architectural model. Constructed from BS316 marine grade stainless steel and finished with gloss black acrylic trim. Ideal for residential or commercial properties with a single entrance, it is a reliable system and is vandal resistant. Door/gate release button to open the door/gate. The long range wireless technology means that there is no need for expensive wiring throughout the building.
£367.01 + VAT
- Surface mounted audio wireless intercom, curved architectural model. Constructed from BS316 marine grade stainless steel and finished with gloss black acrylic trim. Blue backlight keypad. Ideal for residential or commercial properties with a single entrance, it is a reliable system and is vandal resistant. Door/gate release button to open the door/gate. The long range wireless technology means that there is no need for expensive wiring throughout the building.
£513.50 + VAT
- The AES 705-ABK wireless video intercom kit includes a stainless steel intercom panel, with a keypad and black acrylic front trim. Above the keypad is a high quality stainless steel illuminated button with speech area and a camera with night vision (infrared LEDs). With keypad for code lock access control. Metal keypad buttons with blue illumination. 3 relay outputs. 1200 code storage. IP55 weather proof design. Supports up to 3 additional audio handsets (705-EH).
£748.98 + VAT
- Architectural Model with Keypad The 7th Generation of Prime GSM Intercom NEW upgraded version replacing Prime 6!
£592.00 + VAT
AES GSM-ANT-4GW | GSM Antenna With Lead For All AES GSM Systems
The GSM-ANT-4GW has been designed and manufactured by AES. This product is a GSM Hi-gain antenna which comes supplied with all the current AES GSM kits, which is used to transmit the connection signal. This Hi-gain antenna comes with a lead.£37.99 + VAT
Open & Close Stops for Terra SWU300 Underground electric gate motor
£29.99 + VAT
Extra handset for all AES 603 models. Have up to total 4 handsets on one door / gate station. Complete with batteries, charging holster and charger PSU.
£65.00 + VAT
The AES Cellcom Prime 7 series is an advanced GSM audio intercom system. This system has one call button and is, therefore, suitable for one household or business. This state-of-the-art GSM intercom system dials up to four phone numbers in succession on roll-over whenever a visitor pushes the call button on the intercom. User friendly and hassle-free, you can have total remote management over your intercom via phone calls and free Android and iOS smartphone apps for residents and installers - wherever you are in the world.
£463.99 + VAT
The AES Cellcom Prime 7 series is an advanced GSM audio intercom system. This system has two call buttons and is, therefore, suitable for two households or businesses. This state-of-the-art GSM intercom system dials up to four phone numbers per call button in succession on roll-over whenever a visitor pushes the call button on the intercom. User friendly and hassle-free, you can have total remote management over your intercom via phone calls and free Android and iOS smartphone apps for residents and installers - wherever you are in the world.
£947.98 + VAT
The AES Cellcom Prime 7 series is an advanced GSM audio intercom system. This system has three call buttons and is, therefore, suitable for three households or businesses. This state-of-the-art GSM intercom system dials up to four phone numbers per call button in succession on roll-over whenever a visitor pushes the call button on the intercom. User friendly and hassle-free, you can have total remote management over your intercom via phone calls and free Android and iOS smartphone apps for residents and installers - wherever you are in the world.
£962.02 + VAT
The AES Cellcom Prime 7 series is an advanced GSM audio intercom system. This system has four call buttons and is, therefore, suitable for four households or businesses. This state-of-the-art GSM intercom system dials up to four phone numbers per call button in succession on roll-over whenever a visitor pushes the call button on the intercom. User friendly and hassle-free, you can have total remote management over your intercom via phone calls and free Android and iOS smartphone apps for residents and installers - wherever you are in the world.
£974.97 + VAT
- E-Loop Commercial Presence Mode with E-TRANS-Plus, I-Gate-PlusPart Number: ELOOC-RAD-KPTAES E-loop commercial Exit and presence mode with I-GATE PLUS Get more out of the e-Loop by connecting the e-Trans plus plug-in. This device plugs into our latest I-gate unit the I-Gate-Plus, which gives the user extra features. • Set auto relay times. • Set do not disturb times. • SMS low battery notification. • Set e-Loop lock-outtimes. • Program mode. AES E-loop Inground Exit with I-GATE PLUS • 1 x e-Loop inground Exit mode. • 1 x e-Trans-Plus (Plug in). • 1 x I-Gate-Plus. • 1x Magnet. Introducing a new concept in wireless vehicle detection. The inground e-Loop replaces traditional wired inductive loops, saving time and money while increasing reliability. Installation in 3 simple steps 1. Code in the e-Loop. 2. Core bore 89mm hole 70mm deep and secure using flexible mastic. 3. Calibrate the e-Loop… and you’re ready to operate in less than 30minutes. Save many hours of installation time compared to wired loop systems. Features • High security 128 bitencryption. • Quick and easy installation. • Recesses into the driveway. • Not affected by ground movement. • 14500 mA battery giving up to 10 years battery life. • Top access for changing battery. • Up to 50 metres range. The AES IGate Plus is packed with the below features 1200 Numbers for caller ID access Trigger, latch and unlatch gates by SMS or with app Auto call feature to schedule outgoing call (prevents SIM card being deactivated) Activity log feature Includes 7 day time clock. Check stored numbers by SMS. 1 Volt free momentary relay output Check relay status SMS passcode access for non stored numbers Store up to four phone numbers to receive SMS alerts each time the unit is used to grant access. Program times for the relay(s) to operate automatically.Note: Gate or door controller must have a dedicated open input and auto close function enabled
£652.00 + VAT
The Commercial Radar E-Loop with presence mode only is an e-loop that uses magnetometer sensors and radar to ensure transmission is sent to the gate to either open or close. It is one of the safest ways to ensure any accidents do not happen near your gate. Part Number: EL00C-RAD
£419.00 + VAT
- The Commercial Inground Loop is an inground wireless vehicle detection system that uses magnetometer sensors to ensure transmission is sent to the gate to either open or close. It is one of the safest ways to ensure any accidents do not happen near your gate. This is an exit-mode-only model.Part Number:Â EL00IG
£386.00 + VAT
The Commercial Inground Loop is a radar inground wireless vehicle detection system that uses magnetometer sensors and radar to ensure the transmission is sent to the gate to open. It is one of the safest ways to ensure any accidents do not happen near your gate. This is a presence mode-only sensor. Part Number: EL00IG-RAD
£419.00 + VAT
The e-Trans 100 is a two-channel long-range wireless transceiver that can work with both gates or automatic doors. The small design allows it to be easily installed without compromising on the range. Part Number: ETRANS100
£262.00 + VAT
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles. These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using dynabolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle. Note: Gate or door controller must have a dedicated open input and auto close function enabled
£529.00 + VAT
Replaces traditional wired inductive loops, saving you time and money while increasing reliability! The e-Loop Mini is an easy bolt-in alternative for automatic vehicle detection systems. Easily installed into a new or existing gate controller, making it possible to use the e-loop mini on practically any household gate. It offers an accurate, secure, and economical solution for autonomous vehicle detection through the use of magnetic sensor technology.
£429.99 + VAT
Replaces traditional wired inductive loops, saving you time and money while increasing reliability! The e-Loop Mini is an easy bolt-in alternative for automatic vehicle detection systems. Easily installed into a new or existing gate controller, making it possible to use the e-loop mini on practically any household gate. It offers an accurate, secure, and economical solution for autonomous vehicle detection through the use of magnetic sensor technology.
£335.00 + VAT
Replaces traditional wired inductive loops, saving you time and money while increasing reliability! The e-Loop Mini is an easy bolt-in alternative for automatic vehicle detection systems. Easily installed into a new or existing gate controller, making it possible to use the e-loop mini on practically any household gate. It offers an accurate, secure, and economical solution for autonomous vehicle detection through the use of magnetic sensor technology.
£309.00 + VAT
